TR546E Nickel O-Ring Clamp-In Truck Valve Stem 4.25" 75deg. Bend - 1 Valve

Pack of

1 Valve
10 Valves
25 Valves

Truck Valve Details

The TR546E is a 4.25" 75deg. bend nickel-plated O-ring sealed clamp-in truck tire valve stem rated to 150 PSI. The near-right-angle bend combined with maximum length provides the most extreme valve pocket reach in the TR54x series for aluminum truck wheels with 0.382" holes.

Height: 4.25" (4-1/4") with 75deg. bend for deep sharply offset 0.382" hole valve pocket access.
Valve Hole: 0.382" — fits aluminum truck and trailer wheels with smaller valve openings.
Pressure Rating: 150 PSI max cold inflation pressure.
Seal: O-ring sealed for an airtight installation on aluminum wheels.
Cross-Reference: TV-546E, 1-505E, 24239, VS-546E, 17-546E, TR-546E.

Browse more Heavy-Duty Truck & Tractor Valve Stems.

Frequently Asked Questions (FAQs)

When is the TR546E the right choice?

The TR546E is the go-to stem when you need maximum extension (4.25") AND a steep 75deg. angle to reach a deeply recessed, sharply offset valve pocket on an aluminum wheel.

What valve hole does the TR546E fit?

The TR546E fits a 0.382" valve hole, found on many aluminum truck and trailer rims.

What is the pressure rating?

Rated to 150 PSI max cold inflation pressure for commercial truck applications.

Is the TR546E the steepest angled long stem in the series?

Yes. At 4.25" and 75deg., the TR546E offers the most extreme combination of length and angle in the TR54x O-ring series.

What cross-references match the TR546E?

The TR546E cross-references to TV-546E, 1-505E, 24239, VS-546E, 17-546E, and TR-546E.