MASTER® CB12 Fuel Injector & Carburetor Cleaner Dissolves gum, varnish and deposits from carburetor and fuel injectors. Helps prevent poor gas mlleage. Reduces stalling and rough idling. Helps reduce exhaust missions Safe for catalytic converters and oxygen sonsors.DIRECTIONS: Turn engine aft. Pour entire battle contents into gasoline tank. Ons battle trests up to 20 gallons, For best engine performance, use one bottle for avery 2000 miles.
MASTER® MFL12 Concentrated Motor Flush Dissolves heavy deposits and opens restricted oil passages to help improve oil circulation. Also cleans sticky valves, lifters and piston rings.DIRECTIONS: Make sure the crankcase oil is up to safe level.Warm the engine to normal driving temperature then turn engine off. Immediately before changing oil and filter, add Master Motor Flush to crankcase and run engine at Idle speed for 5 minutes. Drain crankcase and replace oil filter. Refill crankcase with fresh oil.
MASTER® PSF128 Power Steering Fluid promotes smoother, Provides smooth performance, protects against foaming, rusting and oxidation. Guards against wear and pump squeal even at very low temperatures. Mixes with all other power steering fluids. Master® Power Steering Fluid meets standard service requirements for most GM, Ford, Chrysler and foreign automobiles. Check owner's manual for specifications.DIRECTIONS: With engine off, fill power steering reservoir. Do not overfill.
MASTER® PSF12 Power Steering Fluid promotes smoother, Provides smooth performance, protects against foaming, rusting and oxidation. Guards against wear and pump squeal even at very low temperatures. Mixes with all other power steering fluids. Master® Power Steering Fluid meets standard service requirements for most GM, Ford, Chrysler and foreign automobiles. Check owner's manual for specifications.DIRECTIONS: With engine off, fill power steering reservoir. Do not overfill.
MASTER® PSL12 Power Steering STOP LEAK promotes smoother, faster turning. Protects and conditions power steering seals by stopping leaks caused by hardening, drying and shrinking of seals. Non-harmful. Non-foaming. Non-corrosive.DIRECTIONS: Turn engine off and add 1/2 bottle (6 oz) to fluid. Do not overfill. You may add the remainder of the bottle to the automatic transmission fluid for smoother shifting and to stop leaks.
